Medical
MEDICAL DEVICE CLASS 2a
The Heat Wrap relieves muscular and joint pains on the back of the neck and in the shoulder area.
1 wrap (29 x 9 cm)
Iron, activated carbon, water.
Ensure that the skin is dry and clean at the place of application. Open the sachet by hand (do not cut) and remove the heat wrap. Gently peel away the protective film on both sides on the back of the heat wrap. Apply the adhesive side of the heat wrap to the skin on the painful area. After use slowly peel off the heat wrap. The heat wrap is activated by air - therefore the sachet should only be opened before using the heat wrap.
WARNINGS: If used inappropriately, the heat wrap can cause burns, even at low temperature! Comply with all instructions and contraindications given in the instruction leaflet and check the area of application at regular intervals! Make sure that air can circulate over the heat wrap and do not apply any pressure. If the heat wrap becomes uncomfortably hot, the application must be discontinued immediately. Do not use when sleeping.
Keep out of reach of children and pets. Store in a cool, dry place avoiding direct sunlight.