Pregnancy Test - Early Detection

1. Open the pouch shortly before testing and remove the test device.
2. Pull out the cap and expose the absorbent tip to urine for at least 5 seconds. The sample can also be tested in a clean, dry container. To do this there has to be enough urine in the container to put the absorbent tip completely into the urine for 5 seconds.
3. Re-cap the device for hygienic reasons and place the test device on a flat surface. Make sure the window side is up. Wait until the pink lines show up. Read the result within 5 minutes. Please note!: Do not read results after more than 5 minutes.

Read results:

• One band: You may assume to be “not pregnant”.
• Two bands: You may assume to be “pregnant”.
• No band (in control panel „C“): Test result “invalid”.

Follow-up actions:

• If the result is “not pregnant“ and your period is late, repeat the test one day later. If the test is still negative, consult your gynaecologist.
• If the result is “pregnant“, please consult your gynaecologist to confirm your pregnancy (avoid potential risks to harm the embryo such as e. g. x-ray).
• If the result is “invalid“, the absorbent tip probably was not thoroughly wet. Please repeat the testing with a new test.

• Passing the urine over the absorbent tip (e.g. in a cup) may cause malfunction of the test.
• Do not read results after more than 5 minutes. A negative result, which may change to be 
  positive after 5 minutes, is not an accurate result.

• The colour intensity of the test bands may vary, due to low hCG concentration at the beginning of pregnancy.
• Beside pregnancy, some illnesses and spontaneous abortions may lead to increased levels of hCG in urine, which may be detected by the test.
• Menopausal urine may similarly cause false positives.
• Low concentration of hCG in a very early stage of pregnancy can give a negative result. In this case, another specimen should be obtained at least 48 hours later and tested.
• Sterility treatments, based on hCG, may cause false results. Please consult your gynaecologist.
• If you repeat the test several times and results are contradictory, please consult your gynaecologist.
• Please see the instruction leaflet for further details.

Keep away from direct sunlight and store in a dry place inside the closed pouch at a temperature between 2° C und 30° C, not longer than for the given durability of 36 months. Perform the test within one hour after opening. DO NOT FREEZE.

How does the Pregnancy Test – Early Detection work?
Human Chorionic Gonadotropin (hCG) is a hormone, produced by the developing placenta shortly after the conception and secreted into the urine. It increases up to the 3rd month of pregnancy. The Pregnancy Test – Early Detection detects even low levels from 10 IU/L of this hormone and verifies it in urine already in the early stages of pregnancy.

When to do the test?
With its detection from 10IU, the LIVSANE Pregnancy Test – Early Detection is very sensitive. As the test can be used up to 5 days before the expected period, it is recommended to only use the first morning urine for testing.

Can alcohol alter the test result?
It is not recommended to do the test after usage of alcohol.

Can medication alter the test result?
hCG, FSH, LH and TSH based medication may have an effect on the test result, other hormone-based contraceptives like the birth control pill may not.